Becton Dickinson along with Epson and NETS Products Group have developed a unique solution that provides a printed record of the test results when connected to the BD VeritorTM Plus Analyzer. The recommended printer models are the Epson TM-M30III Thermal Receipt Printer and the recently approved Epson TM-L90II LFC Liner Free Label Printer. Both printers print the same identical 3-inch (80mm) wide test report when connected to the BD VeritorTM Plus Analyzer. Each BD printer kit includes the printer, power supply, the custom BD USB cable, and respective media. A custom printer cable is required to connect with the BD Veritor™ Plus Analyzer. The BD cable configuration is USB OTG “Micro-A” to USB “B.” A compatible cable is supplied in the starter kit.

Epson TM-M30III is a Sleek 3″ receipt printer with a compact footprint ideal for small counter spaces. The modular case allows for flexible configuration, top load or front load. As previously noted, both printers print the same identical 3-inch (80mm) wide test report. The TM-M30III on thermal receipt paper and the TM-L90II LFC on a liner free label. The most notable difference is in the media. MAXStick is a Liner-Free adhesive thermal label that allows the operator to immediately stick the label a document or patient report without removing a liner backing. No staples, No tape is needed. The custom BD L90II printer firmware also adds a few more features in that the test report generation takes advantage of the label taken sensor. The Taken Sensor accepts multiple print jobs but only prints one label at a time. The printer can also be configured to print from 1 to 4 copies of the patient test report with the default number of copies set at two.

There Will Be Extra Shipping Charges For Alaska, Hawaii, and Canada We Will Contact You Via EMail.

For order and initial printer support questions, please contact NETS-PG

Email – info@nets-pg.com
Phone – (603)493-0918

Epson Tech Support (562) 276-1314, #1

BD Customer Service (800) 638-8663